SLEEVES-N-MORE

IFI ZEN Signature Set Dac 6XX with 4.4mm Pentaconn cable.

IFI ZEN DAC Signature Dac V2 and ZEN CAN Signature 6XX with 4.4mm Pentaconn cable.-0
IFI ZEN DAC Signature Dac V2 and ZEN CAN Signature 6XX with 4.4mm Pentaconn cable.-0
IFI ZEN DAC Signature Dac V2 and ZEN CAN Signature 6XX with 4.4mm Pentaconn cable.-18356
IFI ZEN DAC Signature Dac V2 and ZEN CAN Signature 6XX with 4.4mm Pentaconn cable.-17929
IFI ZEN DAC Signature Dac V2 and ZEN CAN Signature 6XX with 4.4mm Pentaconn cable.-17928
IFI ZEN DAC Signature Dac V2 and ZEN CAN Signature 6XX with 4.4mm Pentaconn cable.-17932
IFI ZEN DAC Signature Dac V2 and ZEN CAN Signature 6XX with 4.4mm Pentaconn cable.-17936
IFI ZEN DAC Signature Dac V2 and ZEN CAN Signature 6XX with 4.4mm Pentaconn cable.-17934
IFI ZEN DAC Signature Dac V2 and ZEN CAN Signature 6XX with 4.4mm Pentaconn cable.-17935

IFI ZEN Signature Set Dac 6XX with 4.4mm Pentaconn cable.

SKU IFI ZEN DAC Signature Set Categories , Tag

£440.00

This ZEN DAC Signature V2 is  a pure DAC and benefits from true-differential balanced circuit design to take performance to the next level. It has upgraded circuit components and short, direct signal paths for optimal signal purity.

IFI Audio ZEN DAC Signature V2 Set with ZEN CAN Signature 6XX with 4.4mm cable
It delivers bit-perfect PCM (up to 32-bit/384kHz), native DSD (up to DSD256), DXD and MQA. It is now a full MQA decoder.
There is a pair of RCA sockets for single-ended connection to an amp, plus a Pentaconn 4.4mm output. When connected to an amp or active speakers equipped with a balanced input – either a 4.4mm Pentaconn input, or stereo XLR inputs via a 4.4mm-to-XLR cable – the full benefit of the ZEN DAC Signature V2’s balanced circuit design can be heard.
The ZEN CAN Signature 6XX improves the sound quality of the original ZEN CAN and adds something special – a custom EQ setting called ActivEQ. It combines active and passive components to create a specific EQ curve to suit the ‘MassDrop x Sennheiser HD 6XX’ headphones.
This can be switched off to make the most of all manner of headphones and in-ear monitors. It also features XSpace – an analogue processing mode which compensates for the ‘in-head localisation’ effect that can occur when using headphones to listen to music that was mixed using a pair of speakers.
It features four gain settings in six dB steps – 0dB, 6dB, 12dB and 18db.
The ZEN CAN Signature 6XX’s circuitry is a balanced, symmetrical dual-mono design. It delivers 1600mW (7.2V) into 32 ohms from the single-ended output, with 15V+ available to loads of 300 ohms or more through the balanced output.
It offers stereo RCA and 3.5mm single-ended inputs, plus a balanced 4.4mm Pentaconn input. A 4.4mm banced output is also provided. It has a 6.3mm output for headphones that have a standard single-endaled connector and a 4.4mm Pentaconn balanced output for headphones offering a balanced connection.

Out of stock

Balanced. Blissfully quiet.

The ZEN DAC Signature V2 incorporates boutique parts and circuitry inspired by the £3,000 iFi Pro range.

It sports a fully-symmetrical, true differential balanced dual-mono signal stage with direct signal paths to ensure optimal signal purity.

The new low jitter crystal clock means >20dB better noise reduction. The ZEN DAC Signature V2 will remain quiet wherever it’s used.

Outstanding components including C0G capacitors from TDK, Panasonic OS-CON and ELNA Slimic II capacitors complete the design.

4.4mm – 4.4mm cable

The IFI  4.4mm – 4.4mm cable employs heavy OFHC continuous cast copper and silver matrix conductors with a total thickness of 14AWG for the best signal transfer.

It’s a perfect addition to our ZEN Signature Set 6XX as this audiophile-grade cable will give you maximum quality balanced signal transfer and minimum interference.

The cable construction is a custom helix design, minimised both in capacitance and inductance, minZ™.

It also has intrinsic shielding provided by minZ™ helix construction. They protect the cable from RFI and EMI noise and provide the cleanest transfer medium possible.

To further insulate the cable, we adopted the RoHS compliant, excellent dielectric property and super-soft (60P) HD polymer with 1500V AC spark resistance.

Weight 3 kg

Reviews

There are no reviews yet.

Be the first to review “IFI ZEN Signature Set Dac 6XX with 4.4mm Pentaconn cable.”

Your email address will not be published. Required fields are marked *